|
Posted March 29th, 2023
a leading high-speed interface, video display, and touch controller IC supplier, announces the availability of the PS8838 USB 3.2 / DP 2.1 MUX and PS8839 USB 3.2 / DP 2.1 DeMUX for commercial and consumer PCs, host systems and peripherals.
|
|
Posted March 22nd, 2023
New 2562-Channel TED provides eDP connectivity with power-saving Panel Self-Refresh(PSR) and ALPM to panel resolutions up to 3840×2160
|
|
Posted February 22nd, 2023
New PS5510 4-Port SuperSpeed+ Hub features 10Gbps support for USB-C and legacy (Type-A) connections plus hardware security features
|
|
Posted January 25th, 2023
New 2886-Channel TED targets lower cost, main-stream a-Si and Oxide TFT panels up to 3072×2160 resolution with two-chip MSO
|
|
Posted January 18th, 2023
Parade Introduces PCI Express 5.0 / CXL Retimer Chip
Sixteen-Lane PCI Express 5.0 Retimer / CXL Chip Supports up to 32 Gbps Operation
|
|
Posted September 14th, 2022
San Jose, Calif.— 1414 September 2022 —Parade Technologies Ltd. (Taiwan OTC: 4966.TWO), a leading video display and interface IC supplier, today announced redriver additions to its portfolio of HDMI™ 2.1/2.0 interface and signal conditioning devices. The new PS8219 HDMI 2.1 redriver and PS8210 HDMI 2.0 redriver are pin compatible with the PS8419 HDMI 2.1 retimer […]
|
|
Posted September 7th, 2022
Parade Introduces PCI Express 4.0 Linear Redriver with 2×2 Crossbar Switch
PS8570 Enables Low Power Operation and Flexible Interconnect
|
|
Posted August 23rd, 2022
Parade Technologies, Ltd. (Stock Code: 4966) today announced it will attend the UBS TMI and Digital Assets Conference 2022. The virtual event will take place on 08/24/2022. The company’s presentation for the conference is available on the MOPS Website (http://mops.twse.com.tw) prior to the conference.
|
|
Posted June 7th, 2022
Parade Technologies to attend the MasterLink x TPEx Taiwan Technology Day Parade Technologies, Ltd. (Stock Code: 4966) today announced it will attend the MasterLink x TPEx Taiwan Technology Day. The virtual event will take place on June 9 and 10 of 2022. The company’s presentation for the conference is available on the MOPS Website (http://mops.twse.com.tw) […]
|
|
Posted October 19th, 2021
Industry’s 1st Retimer to Fully Enable USB4 / DP 2.0 / TBT 3.0
|
|
Posted October 12th, 2021
PS5169/PS5170 Feature USB 3.2 Gen 2 and DP 1.4a Signal Redriving with Very Low Power Consumption
|
|
Posted September 29th, 2021
Parade announces the touch-enabled DP818/DP816 Tcons, TC2200 source driver, and TC2201 Gate-on-Array level shifter
|
|
Posted August 19th, 2021
Parade’s PS188 Combines a USB 3.2 Hub, DisplayPort™ 1.4 to HDMI™ 2.0 Converter and Dual Power Delivery 3.0 Controllers for Single-Chip Solution
|
|
Posted August 3rd, 2021
Protocol Converter Chips provide full HDMI 2.1 performance for Computer Mother Boards and Dongle Accessory Applications
|
|
Posted June 21st, 2021
Automotive AEC-Q100 Qualified DisplayPort Retimer Includes 2:1 Input Mux and Support for DisplayPort Link Rates up to 8.1 Gbps
|
|
Posted June 15th, 2021
Parade introduces TC3400 and TC3402 Tcon devices with integrated source drivers and touchscreen controller
|
|
Posted August 13th, 2020
Parade’s PS8926 is the First 16-Lane PCIe Gen 4 (16 Gbps) Retimer in Commercial Use
|
|
Posted July 14th, 2020
High-Performance Gaming Tcons from Parade Include Support for Proprietary GPU Gaming Features.
|
|
Posted October 21st, 2019
Four-Lane and Sixteen-Lane PCI Express 4.0 Retimer Chips Support up to 16 Gbps Operation
|
|
Posted October 15th, 2019
First Retiming Repeater for HDMI 2.1 includes FRL support up to 12 Gbps to enable 8K and 10K display resolutions
|
|
Posted September 10th, 2019
Small, low-power linear redriver provides ideal solution for smart phones and tablets enabled with the USB Type-C connecto
|
|
Posted August 29th, 2019
By regenerating the received and transmitted signals to the USB Type-C receptacle, repeaters for USB Type-C peripherals offer increased system design flexibility and signal compliance margin
|
|
Posted March 19th, 2019
A New Addition to Parade’s Growing TDDI (Touch & Display Driver Integrated) Product Line, the TC3318 Offers a Slimmer Profile to Reduce the Display Panel Border Width
|
|
Posted March 6th, 2019
New 1932-Channel TED targets lower cost, main-stream slim LTPS and Oxide TFT panels up to 1920×1200 resolution
|
|
Posted September 18th, 2018
The TC3315 TDDI device combines Parade’s touchscreen and display driver technology for FHD+ LTPS in-cell displays.
|
|
Posted August 29th, 2018
By regenerating transmitted signal, repeater for driving USB Type-C Host receptacle offers increase in system design flexibility and signal integrity margin
|
|
Posted May 16th, 2018
Upgraded DP667V Tcon chip extends Embedded DisplayPort (eDP) into automotive display applications
|
|
Posted May 8th, 2018
New 1932-Channel TED provides highly integrated solution for slim LTPS and Oxide TFT panels up to 1920×1200 resolution
|
|
Posted May 1st, 2018
New DP to HDMI Converter Leverages Latest DisplayPort, HDMI, and USB-C Specifications to Offer New Capabilities
|
|
Posted December 5th, 2017
Dual-Port Device Enhances System Integration for Multiple Gen 2, 10Gbit/sec USB 3.1 Channels or Interface Ports
|
|
Posted September 19th, 2017
Retiming Repeater for HDMI 2.0 Includes Two Selectable Inputs and Supports 6 Gbit/sec Data Rate for 4K.
|
|
Posted July 27th, 2017
Dual-Mode DP 1.4 Mux and Demux Devices Include Retiming, Support 8.1Gbps DisplayPort 1.4 and 6.0Gbps HDMI™ 2.0b Data Rates
|
|
Posted May 23rd, 2017
VESA Certified USB Type-C to HDMI 2.0 Dongles now available from Fullink Technology and Gopod Group Utilizing Parade’s PS176 Device
|
|
Posted May 2nd, 2017
PS176 converts DisplayPort Alt Mode to HDMI 2.0 for desktop and home entertainment displays supporting up to 4K@60 resolution
|
|
Posted April 19th, 2017
New Parade Signal Integrity and Switch Products Enable the Highest Data Rates for USB 3.1 and DisplayPort 1.4
|
|
Posted February 6th, 2017
Parade today announced a new eDP Tcon, the DP696, that supports 4K LCD panel resolution and PSR2, or 5K resolution using two devices. A complementary Source Driver, the TC2070, was also announced. Both devices feature Parade’s SIPI COG interface.
|
|
Posted October 25th, 2016
SANTA CLARA, California, October 25, 2016 — Parade Technologies, Ltd. (Taiwan OTC: 4966.TWO), today introduced the TrueTouch® TC3300 device, its first integrated touchscreen controller and display driver solution. The TC3300 combines Parade’s broad portfolio of patented touchscreen technology, as well as proven display processing and high-speed signal interface technology, to provide best-in-class performance for smartphone […]
|
|
Posted September 21st, 2016
Dual-Mode DisplayPort 1.4 Re-Timing Repeaters Remove Timing Jitter, Operate up to Max 8.1 Gbps DP Link Rate, and Max 6.0 Gbps HDMI 2.0 Link Rate Santa Clara, Calif.— 21 September 2016 —Parade Technologies, Ltd. (Taiwan OTC: 4966.TWO), a leading high-speed interface IC supplier, today announced two new jitter cleaning repeater chips designed for DisplayPort 1.3 […]
|
|
Posted June 15th, 2016
Parade announces the PS8566 high-speed signal redriver, supporting 16-channels of PCIe 3.0, targeting enterprise applications including servers and workstations.
|
|
Posted May 17th, 2016
New 2-Lane, Bi-directional PCIe / SATA redriver ideal for SATA Express and new M.2 high speed interface applications
|
|
Posted April 21st, 2016
Parade announced a collaboration with Samsung Display to develop the eDP 1.4b-enabled DP699 TCON for AMOLED panels targeting the tablet and PC notebook markets.
|
|
Posted December 1st, 2015
Parade Introduces the first USB Type-C redriving switches that integrated a USB PD Controller (PS8750) and USB-C Port Controller (PS8751). These port configuration switches support USB-3 and DisplayPort Alt Mode in a USB Type-C enabled Source device.
|
|
Posted November 10th, 2015
Parade introduces two new device families into the TrueTouch® touchscreen controller product line acquired from Cypress. The new touchscreen controllers offer best-in-class performance and feature set for premium tablets and in-cell Smartphones.
|
|
Posted October 27th, 2015
Parade announced two new eDP Tcon devices that comply to the newly released eDP 1.4b Standard. Systems utilizing eDP version 1.4b will begin production in 2016, and Parade’s new devices target the main-stream, high-volume system market.
|
|
Posted August 10th, 2015
Parade introduces DisplayPort to HDMI 2.0a protocol converters for motherboard, cable adapter, docking, and display applications.
|
|
Posted March 31st, 2015
Parade announced a new USB Type-C port configuration switch for devices that include the DisplayPort Alt Mode Sink or Branch function. The new PS8742 includes USB and DisplayPort redrivers.
|
|
Posted January 25th, 2015
Parade announced a USB Type-C switch with integrated redrivers for DisplayPort Alt Mode support in USB Host devices.
|
|
Posted October 22nd, 2014
Parade announced PS8409, first HDMI 2.0 6Gbps jitter-cleaning repeater chip for video source, repeater, display, and DP++ applications.
|
|
Posted October 22nd, 2014
Parade announced DP667, a new eDP Tcon for 4K LCD monitor and AIO panels.
|
|
Posted July 22nd, 2014
Parade announced a new series of eDP Tcon devices that feature Panel Self Refresh (PSR) for display resolutions up to 2560×1700, developed for 2015 mobile device platforms with emphasis on low power consumption.
|
|
Posted March 27th, 2014
Parade Technologies Ltd. today announced two new devices, the PS8642 and PS8640, that provide conversion from MIPI DSI to eDP, both of which are commonly used embedded video interfaces used within portable computing devices. They enable a MIPI-based SoC to drive a higher resolution eDP panel.
|
|
Posted January 14th, 2014
Parade announced a new family of eDP Tcon devices for LCD panels that consume very low power, making them ideal for small-form factor, battery-powered devices. The new devices, the DP676, DP677, DP678, and DP679, use less than half the power of similar existing devices.
|
|
Posted December 10th, 2013
Parade announced new additions to the company’s USB 3.0 Redriver IC product lineup, PS8731 and PS8733, that are optimized for next generation smartphones, tablets and ultra-mobile devices.
|
|
Posted April 29th, 2013
San Jose, CA—30 April 2013—Parade Technologies Ltd. (Taiwan OTC: 4966.TWO), a leading video display and interface IC supplier, today announced two DisplayPort-to-VGA converter chips for the personal computer market.
|
|
Posted October 22nd, 2012
San Jose, CA—22 October 2012—Parade Technologies Ltd. (Taiwan OTC: 4966.TWO), a leading video display and interface IC supplier, today announced a family of eDP 1.3 (Embedded DisplayPort) Tcons (timing controllers) that implement PSR (panel self-refresh) using integrated, on-chip memory.
|
|
Posted October 10th, 2012
San Jose, CA—10 October 2012—Parade Technologies Ltd. (Taiwan OTC: 4966.TWO), a leading video display and interface IC supplier, today announced its new PS8402A IC device, designed to support the new Type 2 cable adaptor configuration. It enables all HDMI 1.4 video formats by supporting data rates up to 3.0Gbps.
|
|
Posted September 4th, 2012
San Jose, CA—4 September 2012—Parade Technologies Ltd. (Taiwan OTC: 4966.TWO), a leading video display and interface IC supplier, today announced its entry into the HDMI®-to-MHL™ transmitter IC market. Parade’s new PS5101 is targeted at smartphones, tablets, digital cameras, camcorders and other power-sensitive mobile platforms that use SoC processors with HDMI outputs.
|
|
Posted June 5th, 2012
San Jose, CA—5 June 2012—Parade Technologies Ltd., a leading video display and interface IC supplier, today announced a new type of point-to-point high speed interface for use within LCD display panels. The new Scalable Intra Panel Interface, or SIPI™, achieves high data rate, low power use, and reduced interference with embedded system wireless services to meet the challenging demands for ultra-thin, high pixel density mobile displays.
|
|
Posted April 26th, 2012
San Jose, Calif.—26 April 2012—Parade Technologies Ltd. (Taiwan OTC: 4966.TWO), a leading video display and interface IC supplier, today announced a new addition to its portfolio of HDMI interface and signal conditioning devices. The new PS8401 is an HDMI jitter-cleaning repeater chip that compensates for HDMI signal skew caused by long signal traces, connectors and cables. Without jitter-cleaning technology, systems may fail the HDMI 1.4 jitter compliance test or exhibit poor video performance. The PS8401 was developed specifically to enable ease-of-design for higher interface rates up to 2.97Gbps, which are specified in the latest HDMI 1.4 standard.
|
|
Posted March 4th, 2012
San Jose, Calif.— 7 February 2012 —Parade Technologies Ltd. (Taiwan OTC: 4966.TWO), a leading video display and interface IC supplier, today announced two new additions to its portfolio of DisplayPort-to-HDMI/DVI conversion chips, enabling emerging applications of 4k x 2k displays at 30Hz and 3D full high-def resolution at 120Hz. Parade’s new PS171 is a DisplayPort 1.1a to HDMI 1.4 and DVI 1.0 converter. The new PS181 is a DisplayPort to Dual-Mode DisplayPort converter.
|
|
Posted October 31st, 2011
San Jose, Calif.—31 October 2011—Parade Technologies Ltd. (Taiwan OTC: 4966.TWO), a leading video display and interface IC supplier, today announced three new additions to the company’s USB 3.0 Repeater/Redriver IC product line.
|
|
Posted September 13th, 2011
San Jose, Calif.—13 September 2011— Parade Technologies, Ltd. (http://www.paradetech.com), a leading supplier of mixed-signal ICs for a variety of popular display and high-speed interface standards, announced that public trading of its shares will begin today as a result of the company’s initial public offering (IPO). The fabless semiconductor company is being publicly listed on Taiwan’s GreTai Securities Market (GTSM) (stock code: 4966).
|
|
Posted May 6th, 2011
San Jose, Calif.—9 May 2011—Parade Technologies Ltd. (www.paradetech.com), a leading video display and interface IC supplier, today announced the expansion of its USB 3.0 Repeater/Redriver IC product line. Parade’s new PS8720 is a Dual USB 3.0 Repeater/ Redriver …
|
|
Posted April 4th, 2011
Leading Chinese TV Maker Hisense Using New Chip in Export DTVs
San Jose, Calif.— April 4, 2011 —Parade Technologies Ltd. (http://www.paradetech.com), a leading video display and interface IC supplier, today announced the world’s fastest and lowest power four-to-one HDMI™ switch. The PS461 incorporates four HDMI receivers and one HDMI transmitter, which enable TVs to…
|
|
Posted March 11th, 2011
New Demultiplexer Chips Support Latest DisplayPort®, HDMI® Features and Data Rates
San Jose, Calif.—13 March 2011—Parade Technologies Ltd. (http://www.paradetech.com), a leading video display and interface IC supplier, today announced the world’s first DisplayPort Demultiplexer ICs that are fully compliant with the higher data rates and capabilities of DisplayPort 1.2 and HDMI 1.4a. Parade’s new PS8336A and PS8336B devices integrate a single Dual Mode DisplayPort 1.2 receiver with two transmitters: a DisplayPort 1.2 compliant output and a HDMI 1.4a compliant TMDS® output. (more…)
|
|
Posted January 14th, 2011
New Repeater Supports 5.4Gb/s Main Link, Fast AUX, and HDMI-compatible Dual-mode Operation San Jose, Calif.—24 January 2011—Parade Technologies Ltd. (http://www.paradetech.com), a leading video display and interface IC supplier, today announced a DisplayPort™ Repeater IC that is fully compliant with the higher data rates of DisplayPort 1.2. Parade’s new PS8330A/B device also supports the Fast AUX […]
|
|
Posted November 8th, 2010
Parade First to Incorporate Automatic Adaptive Equalization into USB 3.0 Repeater/Redriver San Jose, Calif.—8 November 2010—Parade Technologies Ltd. (www.paradetech.com), a leading video display and interface IC supplier, today announced the world’s lowest power USB 3.0 Repeater/Redriver IC. Parade’s new PS8710A/B device is the also the first USB 3.0 Repeater/Redriver to incorporate automatic adaptive equalization, which […]
|
|
Posted August 10th, 2010
Parade Maintains Leadership with First T-CON Designed to Meet New eDP v1.2 Spec San Jose, Calif.—9 August 2010—Parade Technologies Ltd. (www.paradetech.com), a leading video display and interface IC supplier, released the world’s fist video display timing controller (T-CON) IC that satisfies the recently updated VESA® eDP v1.2 specification. Parade’s new DP616 is designed specifically to […]
|
|
Posted June 1st, 2010
PS8521 ICs are World’s First SATA III Repeaters/Redrivers with Adaptive Equalization Technology Jose, Calif.—1 June 2010—Parade Technologies Ltd. (www.paradetech.com), a leading innovator of high-speed interface products, has added two new devices to its popular family of SATA/eSATA/SAS bi-directional redriver integrated circuits. The PS8521 devices are the world’s first 6 Gb/s SATA III repeater ICs (also […]
|
|
Posted September 22nd, 2009
New DDM Tcons support up to 2560×1600 displays at 10-bit color depth San Francisco (Intel Developers Conference) 22 September 2009—Parade Technologies Ltd. (www.paradetech.com), a leading innovator of digital video interface products, introduced the DP627 and DP628 Direct Drive Monitor (DDM) timing controllers with DisplayPort input at the Intel Developer’s Forum (IDF) today. These devices are […]
|
|
Posted August 17th, 2009
San Jose, Calif.—17 August 2009—Parade Technologies Ltd. (www.paradetech.com), a leading innovator of digital video interface products, has introduced the PS8311 DisplayPortTM Repeater device. Like its predecessor the PS8121ED–the world’s first DisplayPort Repeater device, introduced by Parade last year–the PS8311 improves the output signal quality of a DisplayPort transmitter or “source,” such as a GPU. Using […]
|
|
Posted June 1st, 2009
SUNNYVALE, Calif. — (BUSINESS WIRE) — June 1, 2009 — Parade Technologies Ltd. ( www.paradetech.com), a leading innovator of digital video interface products, introduced the first native DisplayPortTM to HDMITM/DVI converter device. The PS161 is an integrated circuit that includes a full DisplayPort receiver, a full HDMI/DVI transmitter, and an optional HDCP repeater. Used inside […]
|
|
Posted March 24th, 2009
Certified Component Now Available in Mass Production SUNNYVALE, Calif.–(BUSINESS WIRE)–March 24, 2009-Parade Technologies Ltd. (www.paradetech.com), a leading innovator of digital video interface products, successfully passed the newly released VESA DisplayPort™ Compliance Test Specifications with its DP621 LCD Timing Controller / DisplayPort Receiver. The DP621 is the very first DisplayPort LCD timing controller to pass the […]
|
|
Posted February 3rd, 2009
PS8511 and PS8515 Series Ideal for Mobile and Green PC eSATA Applications Enabling over 60% Power Savings when Compared to Similar Devices SUNNYVALE, Calif.—3 February 2009—Parade Technologies Ltd. (www.paradetech.com), a leading innovator of high-speed interface products, has introduced two new SATA Bidirectional Repeater integrated circuits. Exhibiting very low dynamic power characteristics, these SATA (Serial Advanced […]
|
|
Posted August 18th, 2008
Single‐Lane DisplayPort Receiver Integrates LCD Timing Controller for Embedded Display Applications New DP606 is Lowest Power DisplayPort TCON Receiver on the Market IDF San Francisco 2008 SAN FRANCISCO–(BUSINESS WIRE)–Parade Technologies Ltd. (www.paradetech.com), a leading innovator of digital video interface products, has introduced the DP606 DisplayPort™ Mobile PC LCD Timing Controller. The DP606 was developed specifically […]
|
|
Posted August 18th, 2008
DisplayPort™ Repeater Device uses Advanced Equalizer and Aux Channel Link Training New PS8121ED DisplayPort™ Repeater Serves Notebook Docking Station and Motherboard Applications IDF San Francisco 2008 SAN FRANCISCO–(BUSINESS WIRE)–Parade Technologies Ltd. (www.paradetech.com), a leading innovator of digital video interface products, has introduced the PS8121ED DisplayPort™ Repeater device. The PS8121ED improves output signal quality of DisplayPort […]
|
|
Posted March 31st, 2008
Company’s DP601 product is powering the industry’s first DisplayPort technology-enabled 42” LCD TV from The Konka Group Co., Ltd. A live demo of this LCD TV will be performed by Parade Technologies and The Konka Group Co., Ltd. at IDF 2008 Shanghai SUNNYVALE, Calif.–(BUSINESS WIRE)—March 31, 2008–Parade Technologies Ltd., a leading developer of digital video […]
|
|
Posted March 31st, 2008
Company will host system level live demonstrations of the world’s first 12.1” LED back-lighted WXGA notebook panel powered by its DP603 product; a 19” WSXGA desktop direct drive monitor panel controlled by its DP621 product; and the industry’s first 42” LCD TV equipped with a DisplayPort input. SUNNYVALE, Calif.–(BUSINESS WIRE)–March 31, 2008–Parade Technologies Ltd., a […]
|
|
Posted January 3rd, 2008
Company will display its technology at the Video Electronics Standards Association’s (VESA®) DisplayPort™ TechZone Pavilion at the Las Vegas Sands Expo and Convention Center SUNNYVALE, Calif.–(BUSINESS WIRE)–Jan. 3, 2008–Parade Technologies Ltd., a leading developer of digital video display interface products, announced today that it will be featuring its DisplayPort technology at the International CES 2008 […]
|
|
Posted August 29th, 2007
World’s First Dual-Mode Product Family of Multi-Port Switches Supports Both the DisplayPort™ and HDMI Interface Standards, Enabling High Speed Video Connectivity for Digital LCD and Plasma TVs, and LCD Monitors SUNNYVALE, Calif.–(BUSINESS WIRE)–August 29, 2007-Parade Technologies Ltd., a leading developer of digital video display interface products, announced today a product family of dual-mode video switches […]
|
|
Posted August 8th, 2007
Parade’s DP501 Dual-Mode DisplayPort Transmitter and DP601 Dual-Mode DisplayPort Receiver Completed VESA PlugTest Successfully SUNNYVALE, Calif.–(BUSINESS WIRE)–August 08, 2007: Parade Technologies, Ltd., a leading developer of digital video display interface products, announced today the reference design of its DP501 DisplayPort 1.1 transmitter with an ATI Radeon™ graphics processor has successfully completed an interoperability test with […]
|
|
Posted July 31st, 2007
DP501 dual-mode DisplayPort transmitter, DP601 dual-mode DisplayPort receiver, PS8121 DisplayPort repeater, and PS101 DisplayPort cable adaptor unleash the full potential of DisplayPort SUNNYVALE, Calif.–(BUSINESS WIRE)–July 31, 2007–Parade Technologies, Ltd., a leading developer of digital video display interface products, announced today the availability of a full suite of DisplayPort devices. This product family consists of DP501 dual-mode […]
|
|
Posted December 11th, 2006
Parade Technologies, Ltd. Delivers High Performance HDMI/DVI Repeater Solution PS101 HDMI/DVI Repeater Enables New Digital Video Applications SUNNYVALE, Calif.–(BUSINESS WIRE)–December 11, 2006-Parade Technologies, Ltd., a leading developer of digital video display interface products, announced today the availability of its PS101 HDMI/DVI repeater, which is capable of meeting performance requirements of both HDMI 1.2a and HDMI […]
|
|
Posted September 5th, 2006
Parade Technologies, Ltd. Delivers High Performance HDMI/DVI Switch Solution PS301 HDMI/DVI Switch Has Been Certified for HDMI 1.2a Compliance by the HDMI Authorized Test Center SUNNYVALE, Calif.–(BUSINESS WIRE)–Sept. 5, 2006–Parade Technologies, Ltd, a developer of digital video display interface products, announced today the successful development of its PS301 3-to-1 and PS201 2-to-1 HDMI/DVI switches, which […]
|