TT7004V is an automotive grade capacitive touchscreen controller with sensing and processing technology to resolve locations and report positions of up to ten fingers on a touchscreen. This touchscreen controller converts an array of sensor capacitances into an array of digital values that are processed by touch-detection and position-resolution algorithms within the controller.


  • High resolution discrete touchscreens


  • Multi-touch capacitive touchscreen controller
    • Robust and production-proven capacitive touchscreen technology backed by over 700 granted and pending patents
    • Screen sizes up to 15 inches diagonal at 6.0mm electrode pitch (16:10 Aspect Ratio)
    • Sensor configuration up to 1836 intersections (88 Touch IO)
    • 56 high signal to noise ratio (SNR) touch receive channels (AFEs)
    • Receive channels configurable for capacitive buttons
    • 32-Bit ARM Cortex® CPU
    • 128-kB flash memory for firmware flexibility
    • Register configurable
    • Noise suppression technologies for battery charger, RF and environmental noise
    • Reports up to 10 fingers
    • Small finger support down to 4mm
    • Parade’s proprietary touch processing IP for faster response and lower power
    • Large-object rejection
    • Automatic baseline to track environmental changes
    • Refresh rate up to 120Hz
    • Multi-touch glove: 10 fingers with thin gloves (1mm thick) and thick gloves (3mm thick)
    • Water rejection and two-finger wet finger tracking using DualSense™
    • Supports Force sensing
    • Low-power Look-for-touch mode
    • Low-power single-finger scan
    • Supports all common touchscreen sensors and stack-ups
    • Touchscreen sensor self-test and Panel ID reporting
    • Parade Technologies TrueTouch® Manufacturing Test Solution
  • Communication Interface to Host
    • I2C slave data rates at 100kHz and 400kHz
    • Parade’s Packet Interface Protocol (PIP)
    • Field upgrades via bootloader
    • Linux/Android™ host driver support
  • Power
    • 1.8V or 3.3V digital and I/O supply (configuration dependent)
    • 3.3V analog supply
  • 128-pin, 14 x 14 x 1.2-mm TQFP package
  • -40° to 105°C operating temperature range (TT7004VTQFP128GTR2-A1)
  • AEC-Q100 Grade 2 qualified

All trademarks mentioned herein are property of their respective owners.