USB 3.0 5Gb/s Unidirectional Repeater
The PS8711A and PS8711B are one-channel, unidirectional USB 3.0 repeater/redriver devices. The on-chip programmable equalization and driver circuits provide signal reconditioning for long media link applications. The device’s unidirectional configuration enables application placement flexibility; for example one device can be applied to the USB receive channel near a USB 3.0 host port, and another device near the USB 3.0 connector for the USB transmit channel.
In addition to supporting full USB 3.0 power management, an additional automatic power saving mode can be enabled that suspends device operation between data packets, reducing power consumption by as much as 90%. Automatic USB device plug/unplug or enable/disable is detected through Rx termination sensing.
KEY FEATURES
- Unidirectional one-channel USB 3.0 redriver (5.0Gbps)
- Supports Low Frequency Periodic Signaling (LFPS) with fast LFPS enter/exit time
- Programmable equalizer enables performance optimization
- Supports full USB 3.0 power management with additional automatic power saving functions
- Supports hot plug with Automatic Receiver Detect
- Integrated 50Ω termination resistors on input and output
- Programmable output de-emphasis levels
- Flexible pin-strapping or local I2C device programming and control options
- Low power consumption
- Single Power Supply:
- 1.5V for PS8711A (lowest power single port USB 3.0 redriver available)
- 3.3V for PS8711B
- In-Line signal connection pins for flow-through PCB layout
- 3x3mm 20-pin TQFN Halogen free RoHS Package
- 0° to 85°C operating temperature range
- ESD: Human Body Model at 8 kV & IEC 6100-4-2, 5kV Direct Pin Zapping
Applications
- Desktop and laptop computers
- Docking stations
- Servers
- Workstations
- Data storage systems